Tinker Board S

  • Rockchip Quad-Core RK3288 processor, integrated ARM® Mali™ -T764 graphics processor
  • 2GB Dual Channel DDR3 Memory
  • Micro SD card slot (TF) 16GB eMMC
  • 4 x USB 2.0
  • Operating temperature: 0 ℃ ~ 60 ℃
SKU: Tinker Board S Categories: , Tag:


Brief Introduction

Tinker Board S is a single board computer (SBC) that offers greater endurance, better stability, and an overall improved user experience for DIY enthusiasts and makers everywhere.

Featuring a powerful and modern quad-core ARM-based processor – Rockchip RK3288 – Tinker Board S offers significantly improved performance compared to other popular SBC boards.

Powered by ARM-based Mali™ -T764 GPU, Tinker Board S’s GPU and fixed-function processor enable high-quality media playback, gaming, computer vision, gesture recognition , image stabilization and processing, as well as computer photography and more.

Tinker Board S is equipped with an HD codec that supports audio up to 24-bit/192kHz. Built-in audio jack supports internal microphone and audio output, no expansion module.

The audio jack has easy plug detection to automatically switch audio output to the audio jack when speakers or headphones are connected.

Tinker Board S features standard manufacturer connectivity options, including a 40-pin GPIO interface that allows communication with multiple inputs. Tinker Board S is equipped with a DSI MIPI connection for monitors and touch screens. A secondary CSI MIPI connection for connection to compatible cameras enables computer vision and more.

The Tinker Board S is also equipped with a full-size HDMI output and four USB 2.0 ports for connecting accessories and expansion peripherals.


CPURockchip Quad-Core RK3288 processor
Memory2GB Dual Channel DDR3
GraphicIntegrated Graphics Processor

ARM® Mali™-T764 GPU*1

Storage16GB eMMC

Micro SD(TF) card slot

Wireless Data Network802.11 b/g/n, Bluetooth V4.0 + EDR
USB Ports4 x USB 2.0
Internal I/O Ports1 x 40-pin header :

– up to 28 x GPIO pins

– up to 2 x SPI bus

– up to 2 x I2C bus

– up to 4 x UART

– up to 2 x PWM

– up to 1 x PCM/I2S

– 2 x 5V power pins

– 2 x 3.3V power pins

– 8 x ground pins

1 x 2-pin contact pin :

– 1 x PWM

– 1 x S/PDIF

1 x 15-pin MIPI DSI

1 x 15-pin MIPI CSI

AccessoriesPassive heatsink*2

User manual

Form Factor3.37  inch x 2.125  inch ( 8.55  cm x 5.4  cm )
EnvironmentOperation temperature: 0℃ ~ 60℃ Non operation temperature: -40℃ ~ 80℃ Non operation humidity: 0% ~ 85% (Non condensing)
Note*1. The ARM® Quad-Core Mali GPU supports max. resolution of 4K@30hz with H.264/H.265 hardware decoder. *2. Do not touch the SoC or heatsink surface directly to prevent possible burn injury.



There are no reviews yet.

Be the first to review “Tinker Board S”

Your email address will not be published. Required fields are marked *