Tinker Board 2S

  • Excellent performance for IoT devices: Powered by the Rockchip RK3399 6 system Core on-chip (SoC) with new 64-bit Armv8 architecture, along with Mali-T860 multi-core.
  • Easy setup tool: Intuitive software for performance tuning, with simple three-step initial configuration.
  • Pro-level admin: ASUS IoT cloud console for data management and analysis, plus deployment support firmware over the air (FOTA).
  • Android 10 support: Benefit from better 3D compute performance, support for Android Neural Networks API 1.2 and Adiantum encryption with 5 times better efficiency.
SKU: Tinker Board 2S Categories: , Tag:

Description

Brief Introduction

Powered by a 6-core Arm® system on chip (SoC), with the new 64-bit Armv8 architecture – Rockchip RK3399 – Tinker Board 2S offers significantly improved performance compared to other popular SBC boards . It also features Arm big.LITTLE technology, which is a heterogeneous processor architecture that pairs two very different processors together in a single SoC.

The big.LITTLE software automates task allocation, ensuring the right CPU cores for each process. As a result, the Tinker Board 2S delivers nearly twice the performance of the original Tinker Board and is significantly faster than many competing SBCs. Besides, based on Arm (SBC), using 64-bit processor of Arm big.LITTLE™ technology, Tinker Board 2S delivers enhanced computing performance with low power consumption.

Specifications

SoCRockchip RK3399
CPUDual-core Arm® Cortex®-A72 @ 2.0 GHz

Quad-core Arm® Cortex®-A53 @ 1.5 GHz

GPUArm® Mali™-T860 MP4 GPU @ 800 MHz
Display1 x HDMI™ with CEC hardware ready

1 x USB Type-C® (DP Alt Mode)

1 x 22-pin MIPI DSI (4 lane)

Memory SizeDual-CH LPDDR4 2GB / 4GB
Storage16GB eMMC

Micro SD(TF) card slot (push/pull)

Connectivity1 x RTL8211F-CG GbE LAN

1 x M.2 – 802.11 a/b/g/n/ac wireless & BT 5.0 (2T2R)

Audio1 x HDMI™ audio output

1 x S/PDIF TX pin (from GPIO)

1 x PCM/I2S pins (from GPIO)

USB3 x USB 3.2 Gen1 Type-A ports

1 x USB 3.2 Gen1 Type-C® OTG port

Camera Interface1 x 15-pin MIPI CSI-2 (2 lane)
Internal Headers1 x 40-pin headers includes:

– up to 28 x GPIO pins

– up to 2 x SPI bus

– up to 2 x I2C bus

– up to 2 x UART

– up to 3 x PWM

– up to 1 x PCM/I2S

– up to 1 x S/PDIF TX

– 2 x 5V power pins

– 2 x 3.3V power pins

– 8 x ground pins

1 x 2-pin Recovery header

1 x 2-pin Power-on header

1 x 2-pin Reset header

1 x 2-pin Debug UART header

1 x 2-pin DC Fan header

1 x 2-pin RTC Battery header

Power Connector

(up to 45W)

1 x 12~19V DC Power Input Jack (5.5/2.5 mm)
OS SupportDebian 9 / Android 10
Dimension3.37 inch x 2.125 inch (85 x 56 mm)
EnvironmentOperation temperature: 0℃ ~ 60℃

Non operation temperature: -40℃ ~ 85℃

Non operation humidity: 0% ~ 85% (Non condensing)

 

Reviews

There are no reviews yet.

Be the first to review “Tinker Board 2S”

Your email address will not be published. Required fields are marked *