Description
Brief introduction:
The IMX8P-IM-A is a Pico-ITX single board that uses the NXP i.MX 8M quad core processor based on ARM Cortex-A53 architecture with speeds up to 1.3 GHz and a Cortex coprocessor. -M4 for high resolution graphics output.
Featuring a compact design, the IMX8P-IM-A offers HDMI and MIPI DSI display output, 40pin-GPIO ports, dual LAN as well as rich expansion capabilities such as M.2 E key socket and card connector Micro SD.
SPI TPM and I²C are also built-in for module upgradeability. Thanks to the low power consumption and scalable performance of the SoC, the IMX8P-IM-A can be used as an SBC inside the interface switch port for data aggregation, processing and forwarding.
ASUS IMX8P-IM-A is a cost-effective single-board computer that is ideal for small-scale embedded automation and IoT applications.
Specifications:
Processor System | |
CPU | NXP® i.MX 8 M ARM Cortex-A53 core |
MAX.SPEED | 1.3 GHz |
L2 Cache | 1MB |
Chipset | Integrated |
Memory | |
Technology | LPDDR4 |
Max. | 4GB on board memory |
Display | |
HDMI | 1, Supports HDMI 2.0 up to 3840 x 2160 @ 60 Hz |
MIPI DSI | 1, Supports MIPI DSI (4 lane) up to 1920 x 1080 @ 60 Hz |
Expansion Slot | |
M.2 | 1 x M.2 2230 E Key for BT/WiFi module (cooperate with Google EdgeTPU Module) |
Others | 1 x Micro-SD Card connector |
Ethernet | |
Speed | 10/100/1000Mbps |
Controller | 1 x Realtek® RTL8211, supports WOL 1 x Intel I210-AT, supports WOL |
Connector | 2 x RJ-45 |
Storage | |
eMMC | 1 x 16GB onboard eMMC |
Front I/O | |
HDMI | 1 |
USB3.2 Gen1 | 2@Type A, 5V/2A 1@Type C OTG, 5V/1.5A |
Ethernet | 2 |
Power Button | 1 |
Reset Button | 1 |
Rear I/O | |
Power Connector | DC Power input |
Internal Connector | |
GPIO Header | 1 x 40-pin headers includes: – up to 6 x GPIO pins – up to 2 x I2C bus – up to 1 x UART – up to 2 x PWM – up to 1 x PCM/I2S – 2 x 5V power pins – 2 x 3.3V power pins – 8 x ground pins |
Micro-SD Card | 1 Slot |
TPM Header 1 (14-1 pin) | 1 (PWM+DC Mode) |
MIPI DSI | 1, Supports MIPI DSI (4 lane) up to 1920 x 1080 @ 60 Hz |
MIPI CSI | 2, support two MIPI-CSI camera inputs (4-lane each) |
Watchdog Timer | |
S/W | Set up by software |
Security Module | |
TPM | TPM 2.0 power by Nuvoton NCPT 750 (Optional) |
Manageability | |
WOL | |
Power | |
Power Type | DC power input |
Voltage | 12-24V |
Operating System | |
Linux | Linux Yocto |
Microsoft Windows | Windows 10 IoT Core (Limited support, beta version avavilable) |
Environment | |
Operating Temperature | -20~60°C |
Non-Operating Temperature | -40~85° C |
Relative Humidity | 10~95% |
Dimension | |
Form Factor | 100mm x 72mm x 21mm |
Certification | |
Safety | CE, FCC |
Reviews
There are no reviews yet.