Description
Brief introduction:
Advantech ADAM-6052 is an 8-channel Modbus TCP digital input expansion module, supporting 8 channels of Sink type digital output.
ADAM-6052 has the ability to integrate automation and enterprise systems easily through internet technology without having to change the entire architecture of the control system, and can monitor the device status. be remote.
This compact module also offers intelligent control thanks to Peer-to-Peer networking and GCL (Graphic Condition Logic) graphics to act as a stand-alone device for measurement, control and automation.
Industry standard design, support multiple protocols Modbus/TCP, TCP/IP, UDP, HTTP, DHCP, SNMP, MQTT with the ability to work well in harsh environment -20 ~ 70°C, ADAM-6052 suitable suitable for many industrial IoT applications.
Specifications:
| Digital Input | |
| Channels | 8 |
| Dry Contact | Logic level 0: open Logic level 1: close to GND |
| Wet Contact | Logic level 0: 0 ~ 3 VDC Logic level 1: 10 ~ 30 VDC |
| Supports 3 kHz Counter Input (32-bit + 1-bit overflow) | |
| Keep/Discard Counter Value when Power-off | |
| Supports 3 kHz Frequency Input | |
| Supports Inverted DI Status | |
| Digital Output | |
| Channels | 8 (Source Type) |
| Voltage Range | 10 ~ 35 VDC |
| Current | 1 A (per channel) |
| Supports 5 kHz Pulse Output | |
| Supports High-to-Low and Low-to-High Delay Output | |
| Supports Over Current Protection | |
| Ordering Information | |
| ADAM-6052-D | 16-ch Source-type Isolated DI/O Modbus TCP Module |
| General | |
| Certification | FCC, CE, UL *Class I, Division 2, Groups A, B, C and D Hazardous Locations |
| LAN | 10/100Base-T(X) |
| Power Consumption | 2 W @ 24 VDC |
| Connectors | 1 x RJ-45 (LAN), Plug-in screw terminal block (I/O and power) |
| Watchdog | System (1.6 second) and Communication (programmable) |
| Power Input | 10 ~ 30 VDC |
| Supports Peer-to-Peer, GCL | |
| Supports User Defined Modbus Address | |
| Supports Modbus/TCP, TCP/IP, UDP, RESTful, MQTT ( D version), SNMP (D version) Protocol | |
| Protection | |
| Power Reversal Protection | |
| Isolation Protection | 2,000 VDC |
| Environment | |
| Operating Temperature | -20 ~ 70°C (-4 ~ 158°F) D version -40 ~ 70°C (-40~158°F) |
| Storage Temperature | -30 ~ 80°C (-22 ~ 176°F) D version -40 ~ 85°C ( -40~185°F) |
| Operating Humidity | 20 ~ 95% RH (non-condensing) |
| Storage Humidity | 0 ~ 95% RH (non-condensing) |
Reviews
There are no reviews yet.