Description
Brief introduction:
Advantech ADAM-6050 is a 12-channel Modbus TCP digital input expansion module that supports Sink type 6-channel digital output.
ADAM-6050 completes automation and enterprise system integration easily through internet technology, without the need to change the entire control system architecture, and can monitor status remote device.
The ADAM-6050 module is supported by Peer-to-Peer (P2P) networking and Graphic Condition Logic, which can work as a stand-alone device for measurement, control and automation instead of additional controller or programmed. System configuration can be completed in an extremely short time with an easy-to-use and intuitive graphical utility.
Industrially designed with CE/FCC/UL standards, capable of operating in harsh environments, where temperatures range from -20 ~ 70°C, the ADAM-6050 is suitable for many industrial IoT applications.
Specifications:
| Digital Input | |
| Channels | 12 |
| Dry Contact | Logic level 0: close to GND Logic level 1: open |
| Wet Contact | Logic level 0: 0 ~ 3 VDC Logic level 1: 10 ~ 30 VDC |
| Supports 3 kHz Counter Input (32-bit + 1-bit overflow) | |
| Keep/Discard Counter Value when Power-off | |
| Supports 3 kHz Frequency Input | |
| Supports Inverted DI Status | |
| Digital Output | |
| Channels | 6 (sink type), open collector to 30 V, 100 mA maximum load |
| Supports 5 kHz Pulse Output | |
| Supports High-to-Low and Low-to-High Delay Output | |
| Ordering Information | |
| ADAM-6050-D1 | 18-ch Isolated DI/O Modbus TCP Module |
| General | |
| Certification | FCC, CE, UL *Class I, Division 2, Groups A, B, C and D Hazardous Locations |
| LAN | 10/100Base-T(X) |
| Power Consumption | 2 W @ 24 VDC |
| Connectors | 1 x RJ-45 (LAN), Plug-in screw terminal block (I/O and power) |
| Watchdog | System (1.6 second) and Communication (programmable) |
| Power Input | 10 ~ 30 VDC |
| Supports Peer-to-Peer, GCL | |
| Supports User Defined Modbus Address | |
| Supports Modbus/TCP, TCP/IP, UDP, RESTful, MQTT ( D version), SNMP (D version) Protocol | |
| Protection | |
| Power Reversal Protection | |
| Isolation Protection | 2,000 VDC |
| Environment | |
| Operating Temperature | -20 ~ 70°C (-4 ~ 158°F) D version -40 ~ 70°C (-40~158°F) |
| Storage Temperature | -30 ~ 80°C (-22 ~ 176°F) D version -40 ~ 85°C ( -40~185°F) |
| Operating Humidity | 20 ~ 95% RH (non-condensing) |
| Storage Humidity | 0 ~ 95% RH (non-condensing) |
Reviews
There are no reviews yet.