Description
Brief introduction:
The Advantech ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general-purpose PID control applications.
ADAM-6022 is a user-friendly utility software that supports setting PID parameters (Pv, Mv, & Sv). Through the integrated web, users can monitor and change control setpoints through a web browser.
In addition, this device also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor I/O data and change control parameters.
Industrial design that meets CE/FCC/UL standards, capable of operating in harsh environments, where temperatures range from -10 ~ 50°C, ADAM-6022 is suitable for many IoT applications.
Specifications:
| General | |
| Loop Number | 2 (3 AI, 1 AO, 1 DI, 1 DO for each control loop) |
| Analog Input | |
| Channels | 6 (differential) |
| Input Range | ±10 VDC, 0 ~ 20 mA, 4 ~ 20 mA |
| Analog Output | |
| Channels | 2 |
| Output Type | V, mA |
| Output Range | 0 ~ 10 VDC, 4 ~ 20 mA, 0 ~ 20 mA |
| Digital Input | |
| Channels | 2 |
| Dry Contact | Logic level 0: close to GND Logic level 1: open |
| Wet Contact | Logic level 0: 0 ~ 3 VDC Logic level 1: 10 ~ 30 VDC |
| Digital Output | |
| Channels | 2, open collector to 30 V, 100 mA max. load |
| Power Dissipation | 300 mW for each module |
| Ordering Information | |
| ADAM-6022 | Ethernet-based Dual-loop PID Controller |
| General | |
| Certification | CE, FCC, UL |
| LAN | 10/100Base-T(X) |
| Power Consumption | 4 W @ 24 VDC |
| Connectors | 1 x RJ-45 (LAN), Plug-in screw terminal block (I/O and power) |
| Watchdog | System (1.6 second) and Communication (programmable) |
| Power Input | 10 ~ 30 VDC |
| Supports Modbus/TCP, TCP/IP, UDP, RESTful (D version), MQTT (D version), SNMP (D version) | |
| Analog Input | |
| Input Impedance | 20 MΩ |
| Accuracy | ±0.1% of FSR |
| Resolution | 16-bit |
| Sampling Rate | 10 sample/second |
| CMR @ 50/60 Hz | 90 dB |
| NMR @ 50/60 Hz | 60 dB |
| Span Drift | ±25 ppm/° C |
| Zero Drift | ±6 μV/° C |
| Analog Output | |
| Accuracy | ±0.1% of FSR |
| Resolution | 12-bit |
| Drift | ±50 ppm/° C |
| Current Load Resistor | Max. 500Ω |
| Voltage Load Resistor | Min. 1K Ω |
| Protection | |
| Isolation Protection | 2,000 VDC |
| Built-in TVS/ESD Protection | |
| DI Over Voltage Protection | 35 VDC |
| Power Reversal Protection | |
| Environment | |
| Operating Temperature | -10 ~ 50° C (14 ~ 122° F) D version: -40 ~ 70° C (-40~158°F) |
| Storage Temperature | -20 ~ 80° C (-4 ~ 176° F) D version: -40 ~ 80° C (-40~176° F) |
| Operating Humidity | 20 ~ 95% RH (non-condensing) |
| Storage Humidity | 0 ~ 95% RH (non-condensing) |
Reviews
There are no reviews yet.