• 8 channel Analog input (voltage or current)
  • Protocol: ASCII
  • Watchdog timer for system recovery
SKU: IOT06196


Brief introduction:

The ADAM-4017 is a 16-bit Analog input module that provides 8 programmable input channels on all channels.

The ADAM-4017’s optically isolated input provides 3000 VDC isolation between the analog input and the module, protecting the module and peripherals from damage caused by high input line voltage. This module also has built-in signal conditioning, A/D conversion, range and RS-485 digital communication.

The ADAM-4017 uses a 16-bit sigma delta A/D converter to convert sensor voltage or current into digital data. This digital data is converted into technical units. When prompted by the server, the module sends data to the server via the standard RS-485 interface.

The ADAM-4017 is an extremely cost-effective solution for industrial monitoring and measurement applications.


Power Consumption 1.2 W @ 24 VDC
Watchdog Timer System (1.6 second)
Supported Protocols ASCII command
Power Input Unregulated 10 ~ 30 VDC
Connectors 2 x plug-in terminal block (#14 ~ 22 AWG)
Analog Input
Channels8 differential
lnput TypemV, V, mA
lnput Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA
Analog Input
Accuracy Voltage mode: ±0.1% or better

Current mode: ±0.2% or better

Resolution 16-bit
Sampling Rate 10 sample/second (total)
Isolation Voltage 3,000 VDC
CMR @ 50/60 Hz 120 dB
NMR @ 50/60 Hz 100 dB
Span Drift ±25 ppm/°C
Zero Drift ±6 μV/°C
Humidity 5 ~ 95% RH
Operating Temp. -10 ~ 70°C (14 ~ 158°F)
Storage Temp. -25 ~ 85°C (-13 ~ 185°F)
Ordering Information 
ADAM-4017-E 8-ch Analog Input Module



There are no reviews yet.

Be the first to review “ADAM-4017”

Your email address will not be published. Required fields are marked *